What mulchers can a Takeuchi TL12V2 run?

42 forestry mulchers in our database are a good fit for the Takeuchi TL12V2. Below: every mulcher, brush cutter and other hydraulic attachment we track, checked against this machine's published flow, pressure and horsepower.

Takeuchi TL12V2 specs

Type: CTL
Engine HP: 111.3 as published
Operating weight: 12865 lb
Rated operating capacity: 4110 lb 35% tipping load (ISO 14397-1)

Aux circuit	Flow GPM	Pressure PSI
Standard flow	23.2	3481
High flow	40.4	not published

Source: official · Note: Hydraulic system pressure published once; high-flow pressure not stated separately.

Attachment type	Good	Marginal	Won't run
Forestry Mulchers	42	6	4
Brush Cutters	6	15	9
Stump Grinders	2	2	2
Cold Planers	4	4	0
Trenchers	4	0	0
Auger Drives	6	3	4
Snow Blowers	7	0	3

Placeholder · featured partner slot

Featured maker / dealer slot — Takeuchi TL12V2 dealers. Reserved for a future paid placement. No partner has been signed. This box is intentionally empty.

Open in fit checker

Verify with your dealer. Results come from published specs and our matching rules. They are not a guarantee. Coupler type, case-drain line, electrical connectors, auxiliary options, relief settings and model year all matter. Confirm with the dealer and the attachment maker before you buy or run anything.

Forestry Mulchers on the Takeuchi TL12V2

42 good fit6 marginal4 won't run

Good fit
Denis Cimaf DAF-150D (standard flow, confidence high) · details
23.2 GPM meets the 23 GPM minimum required flow. 3481 PSI is within the head's pressure rating. 111.3 HP is within the head's horsepower range.
Good fit
Prinoth Grizzly M450s-2200 (high flow, confidence medium) · details
40.4 GPM is inside the 31.7-66 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Blue Diamond SD Drum Mulcher 79 in (high flow, confidence medium) · details
40.4 GPM is inside the 35-52 GPM range.
Good fit
Fecon Blackhawk BK7618 (high flow, confidence medium)
40.4 GPM is inside the 30-50 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Prinoth Grizzly M450s-1900 (high flow, confidence medium)
40.4 GPM is inside the 24.6-52.8 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Denis Cimaf DAF-180D (high flow, confidence medium)
40.4 GPM meets the 35 GPM minimum required flow. 111.3 HP is within the head's horsepower range.
Good fit
Bobcat Drum Mulcher 72 in 2-speed (high flow, confidence medium)
40.4 GPM is at or under the 45 GPM maximum (no minimum published).
Good fit
Cat HM418 Mulcher (bite limiter) (high flow, confidence medium)
40.4 GPM is inside the 40-41 GPM range.
Good fit
FAE UML/SSL SONIC-175 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
FAE UML/SSL VT-175 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
FAE UML/SSL/BL SONIC-175 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
FAE UML/SSL/BL VT-175 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Fecon Bull Hog BH85SS (high flow, confidence medium)
40.4 GPM is inside the 30-50 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Loftness Carbide Cutter 71G4 (high flow, confidence medium)
40.4 GPM is inside the 33-45 GPM range.
Good fit
Blue Diamond SD Drum Mulcher 70 in (high flow, confidence medium)
40.4 GPM is inside the 35-52 GPM range.
Good fit
Cat HM418 Mulcher (drum) (high flow, confidence medium)
40.4 GPM is inside the 40-41 GPM range.
Good fit
Prinoth Grizzly M450s-1600 (standard flow, confidence medium)
23.2 GPM is inside the 22.5-52.8 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Cat HM416 Mulcher (drum) (high flow, confidence medium)
40.4 GPM is inside the 36-41 GPM range.
Good fit
FAE UML/SSL SONIC-150 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
FAE UML/SSL VT-150 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
FAE UML/SSL/BL SONIC-150 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
FAE UML/SSL/BL VT-150 (high flow, confidence medium)
40.4 GPM is inside the 30-53 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Fecon Blackhawk BK6218 (high flow, confidence medium)
40.4 GPM is inside the 30-50 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Bobcat Drum Mulcher 61 in 2-speed (high flow, confidence medium)
40.4 GPM is at or under the 45 GPM maximum (no minimum published).
Good fit
Bobcat Drum Mulcher 61 in 2-speed DCR (high flow, confidence medium)
40.4 GPM is at or under the 45 GPM maximum (no minimum published).
Good fit
Fecon Bull Hog BH74SS (high flow, confidence medium)
40.4 GPM is inside the 30-50 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Loftness Carbide Cutter 61G4 (high flow, confidence medium)
40.4 GPM is inside the 33-45 GPM range.
Good fit
Blue Diamond Disc Mulcher 60 in, 150cc (high flow, confidence medium)
40.4 GPM is inside the 32-45 GPM range.
Good fit
Blue Diamond HD Drum Mulcher 60 in (standard flow, confidence medium)
23.2 GPM is inside the 22-46 GPM range.
Good fit
Blue Diamond SD Drum Mulcher 60 in (high flow, confidence medium)
40.4 GPM is inside the 35-52 GPM range.
Good fit
Bobcat Disc Mulcher 60DCM-G132 (high flow, confidence medium)
40.4 GPM is inside the 32-45 GPM range.
Good fit
Bobcat Disc Mulcher 60DCM-P124 (high flow, confidence medium)
40.4 GPM is inside the 32-45 GPM range.
Good fit
Bobcat Drum Mulcher 50 in 2-speed (high flow, confidence medium)
40.4 GPM is at or under the 45 GPM maximum (no minimum published).
Good fit
Bobcat Drum Mulcher 50 in 2-speed DCR (high flow, confidence medium)
40.4 GPM is at or under the 45 GPM maximum (no minimum published).
Good fit
Diamond Mowers Drum Mulcher DC Pro (standard flow, confidence medium)
23.2 GPM is inside the 17-40 GPM range.
Good fit
Fecon Bull Hog BH62SS (high flow, confidence medium)
40.4 GPM is inside the 30-50 GPM range. 111.3 HP is within the head's horsepower range.
Good fit
Bobcat Disc Mulcher 48DCM-G88 (standard flow, confidence medium)
23.2 GPM is inside the 23-29 GPM range.
Good fit
Blue Diamond Disc Mulcher 44 in, 100cc (standard flow, confidence medium)
23.2 GPM is inside the 20-30 GPM range.
Good fit
Blue Diamond Disc Mulcher 44 in, 150cc (high flow, confidence medium)
40.4 GPM is inside the 30-44 GPM range.
Good fit
Cat HM416 Mulcher (bite limiter) (high flow, confidence medium)
40.4 GPM is inside the 40-41 GPM range.
Good fit
Diamond Mowers Drum Mulcher DC Pro X2 (standard flow, confidence medium)
23.2 GPM is inside the 23-50 GPM range.
Good fit
Diamond Mowers Drum Mulcher OD Pro X2 (high flow, confidence medium)
40.4 GPM is inside the 27-50 GPM range.
Marginal
Fecon Bull Hog RK6015 (standard flow) (standard flow, confidence high)
23.2 GPM is inside the 17-34 GPM range. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 75 HP maximum.
Marginal
Cat HM115 Mulcher (standard flow, confidence high)
23.2 GPM is above the 23 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. Machine relief 3481 PSI exceeds the head's 3336 PSI max - confirm relief setting with dealer.
Marginal
Cat HM215 Mulcher (standard flow, confidence high)
23.2 GPM is up to 10% below the 25 GPM minimum - expect reduced speed/power. Machine relief 3481 PSI exceeds the head's 3336 PSI max - confirm relief setting with dealer.
Marginal
Fecon Bull Hog RK5015 (standard flow) (standard flow, confidence high)
23.2 GPM is inside the 17-34 GPM range. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 75 HP maximum.
Marginal
Bobcat Drum Mulcher 61 in 1-speed (high flow, confidence medium)
40.4 GPM is above the 40 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
Bobcat Disc Mulcher 48DCM-G103 (high flow, confidence medium)
40.4 GPM is above the 37 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Won't run
Denis Cimaf DAF-180E (standard flow, confidence high)
23.2 GPM is well below the 50 GPM minimum. 3481 PSI is within the head's pressure rating. 111.3 HP is well below the 125 HP minimum.
Won't run
Cat HM316 Mulcher (drum) (standard flow, confidence high)
23.2 GPM is well below the 31 GPM minimum. 3481 PSI is within the head's pressure rating.
Won't run
Cat HM112 Mulcher (standard flow, confidence high)
23.2 GPM is far above the 18 GPM maximum - wrong motor size for this circuit. Machine relief 3481 PSI exceeds the head's 3336 PSI max - confirm relief setting with dealer.
Won't run
Cat HM316 Mulcher (bite limiter) (standard flow, confidence high)
23.2 GPM is well below the 31 GPM minimum. 3481 PSI is within the head's pressure rating.

Brush Cutters on the Takeuchi TL12V2

6 good fit15 marginal9 won't run

Good fit
Blue Diamond Brush Cutter 84 in Dual, 125cc (standard flow, confidence high) · details
23.2 GPM is inside the 23-30 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond Brush Cutter Severe Duty Series 2 72 in, 150cc (standard flow, confidence high)
23.2 GPM is inside the 16-26 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond HD Closed Front Brush Cutter 72 in, 160cc (standard flow, confidence high)
23.2 GPM is inside the 19-26 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond Brush Cutter Severe Duty Series 2 72 in, 250cc (high flow, confidence medium)
40.4 GPM is inside the 35-45 GPM range.
Good fit
Bobcat Brushcat 72 in standard flow (standard flow, confidence medium) · details
23.2 GPM is inside the 15-26 GPM range.
Good fit
Bobcat Brushcat 66 in standard flow (standard flow, confidence medium)
23.2 GPM is inside the 15-24 GPM range.
Marginal
Blue Diamond Brush Cutter 84 in Dual, 80cc (standard flow, confidence high)
23.2 GPM is above the 22 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3481 PSI is within the head's pressure rating.
Marginal
Blue Diamond Brush Cutter Extreme Duty Closed Front 72 in, 160cc (standard flow, confidence high)
23.2 GPM is inside the 16-26 GPM range. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Marginal
Blue Diamond Brush Cutter Extreme Duty Open Front 72 in, 160cc (standard flow, confidence high)
23.2 GPM is inside the 16-26 GPM range. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Marginal
Blue Diamond Brush Cutter Extreme Duty Closed Front 60 in, 100cc (standard flow, confidence high)
23.2 GPM is above the 22 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Marginal
Blue Diamond Brush Cutter Extreme Duty Open Front 60 in, 100cc (standard flow, confidence high)
23.2 GPM is above the 22 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Marginal
Blue Diamond Brush Cutter Extreme Duty Open Front 60 in, 200cc (standard flow, confidence high)
23.2 GPM is inside the 23-40 GPM range. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Marginal
Bobcat HD Brush Cutter 86 in high flow (high flow, confidence medium)
40.4 GPM is above the 37 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
Bobcat Brushcat 80 in high flow (standard flow, confidence medium)
23.2 GPM is up to 10% below the 24 GPM minimum - expect reduced speed/power.
Marginal
Bobcat HD Brush Cutter 74 in high flow (high flow, confidence medium)
40.4 GPM is above the 37 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
Bobcat HD Brush Cutter 74 in standard flow (standard flow, confidence medium)
23.2 GPM is above the 23 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
Blue Diamond Brush Cutter Extreme Duty Closed Front 72 in, 250cc (high flow, confidence medium)
40.4 GPM is inside the 36-45 GPM range. 111.3 HP is above the head's 110 HP maximum.
Marginal
Blue Diamond Brush Cutter Extreme Duty Open Front 72 in, 250cc (high flow, confidence medium)
40.4 GPM is inside the 36-45 GPM range. 111.3 HP is above the head's 110 HP maximum.
Marginal
Bobcat Brushcat 72 in high flow (standard flow, confidence medium)
23.2 GPM is up to 10% below the 24 GPM minimum - expect reduced speed/power.
Marginal
Bobcat Brushcat 66 in high flow (standard flow, confidence medium)
23.2 GPM is up to 10% below the 24 GPM minimum - expect reduced speed/power.
Marginal
Bobcat HD Brush Cutter 62 in standard flow (standard flow, confidence medium)
23.2 GPM is above the 23 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Won't run
Blue Diamond Brush Cutter Extreme Duty Closed Front 72 in, 200cc (standard flow, confidence high)
23.2 GPM is well below the 27 GPM minimum. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Won't run
Blue Diamond Brush Cutter Extreme Duty Open Front 72 in, 200cc (standard flow, confidence high)
23.2 GPM is well below the 27 GPM minimum. 3481 PSI is within the head's pressure rating. 111.3 HP is above the head's 110 HP maximum.
Won't run
Blue Diamond Brush Cutter Severe Duty Series 2 72 in, 200cc (standard flow, confidence high)
23.2 GPM is well below the 27 GPM minimum. 3481 PSI is within the head's pressure rating.
Won't run
Blue Diamond HD Closed Front Brush Cutter 60 in, 100cc (standard flow, confidence high)
23.2 GPM is far above the 20 GPM maximum - wrong motor size for this circuit. 3481 PSI is within the head's pressure rating.
Won't run
Blue Diamond HD Closed Front Brush Cutter 60 in, 80cc (standard flow, confidence high)
23.2 GPM is far above the 16 GPM maximum - wrong motor size for this circuit. 3481 PSI is within the head's pressure rating.
Won't run
Bobcat HD Brush Cutter 62 in high flow (standard flow, confidence medium)
23.2 GPM is well below the 26 GPM minimum.
Won't run
Bobcat Brushcat 54 in (35cc) (standard flow, confidence medium)
23.2 GPM is far above the 12.5 GPM maximum - wrong motor size for this circuit.
Won't run
Bobcat Brushcat 54 in (50cc) (standard flow, confidence medium)
23.2 GPM is far above the 18 GPM maximum - wrong motor size for this circuit.
Won't run
Bobcat Brushcat 44 in (30cc) (standard flow, confidence medium)
23.2 GPM is far above the 12.5 GPM maximum - wrong motor size for this circuit.

Stump Grinders on the Takeuchi TL12V2

2 good fit2 marginal2 won't run

Good fit
Blue Diamond Stump Grinder Extreme Duty 24 in wheel, 75cc (PN 104120) (standard flow, confidence medium)
23.2 GPM is inside the 20-25 GPM range.
Good fit
Blue Diamond Stump Grinder Extreme Duty 26 in wheel, 170cc (PN 104230) (high flow, confidence medium)
40.4 GPM is inside the 39-45 GPM range.
Marginal
Blue Diamond Stump Grinder Extreme Duty 24 in wheel, 90cc (PN 104130) (standard flow, confidence medium)
23.2 GPM is up to 10% below the 25 GPM minimum - expect reduced speed/power.
Marginal
Blue Diamond Stump Grinder Extreme Duty 26 in wheel, 150cc (PN 104220) (high flow, confidence medium)
40.4 GPM is above the 39 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Won't run
Blue Diamond Stump Grinder Extreme Duty 24 in wheel, 60cc (PN 104110) (standard flow, confidence medium)
23.2 GPM is far above the 20 GPM maximum - wrong motor size for this circuit.
Won't run
Blue Diamond Stump Grinder Extreme Duty 26 in wheel, 130cc (PN 104210) (standard flow, confidence medium)
23.2 GPM is well below the 29 GPM minimum.

Cold Planers on the Takeuchi TL12V2

4 good fit4 marginal0 won't run

Good fit
Blue Diamond Cold Planer Extreme Duty Series 2, 16 in (standard flow, confidence high)
23.2 GPM is inside the 17-30 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond Cold Planer Extreme Duty Series 2, 48 in (high flow, confidence medium)
40.4 GPM is inside the 32-50 GPM range.
Good fit
Blue Diamond Cold Planer Extreme Duty Series 2, 40 in (high flow, confidence medium)
40.4 GPM is inside the 29-45 GPM range.
Good fit
Blue Diamond Cold Planer Extreme Duty Series 2, 30 in (high flow, confidence medium)
40.4 GPM is inside the 29-45 GPM range.
Marginal
Blue Diamond Cold Planer Extreme Duty Series 2, 14 in (standard flow, confidence high)
23.2 GPM is above the 21 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3481 PSI is within the head's pressure rating.
Marginal
Blue Diamond Cold Planer Extreme Duty Series 2, 24 in (high flow, confidence medium)
40.4 GPM is above the 40 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
Blue Diamond Cold Planer Extreme Duty Series 2, 20 in (high flow, confidence medium)
40.4 GPM is above the 40 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.
Marginal
Blue Diamond Cold Planer Extreme Duty Series 2, 18 in (high flow, confidence medium)
40.4 GPM is above the 40 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed.

Trenchers on the Takeuchi TL12V2

4 good fit0 marginal0 won't run

Good fit
Blue Diamond Trencher Extreme Duty, 12 in cut (PN 131577-00) (standard flow, confidence high)
23.2 GPM is inside the 16-30 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond Trencher Extreme Duty, 10 in cut (PN 131576-00) (standard flow, confidence high)
23.2 GPM is inside the 16-30 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond Trencher Extreme Duty, 8 in cut (PN 131575-00) (standard flow, confidence high)
23.2 GPM is inside the 16-30 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Blue Diamond Trencher Extreme Duty, 6 in cut (PN 131574-00) (standard flow, confidence high)
23.2 GPM is inside the 16-30 GPM range. 3481 PSI is within the head's pressure rating.

Auger Drives on the Takeuchi TL12V2

6 good fit3 marginal4 won't run

Good fit
Danuser EP1530 Auger Drive (standard flow, confidence high)
23.2 GPM is inside the 15-30 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Danuser EP2035 Auger Drive (standard flow, confidence high)
23.2 GPM is inside the 20-35 GPM range. 3481 PSI is within the head's pressure rating.
Good fit
Pengo CS 35-25 Auger Drive (standard flow, confidence high)
23.2 GPM is at or under the 25 GPM maximum (no minimum published). 3481 PSI is within the head's pressure rating.
Good fit
Pengo CS 38-30 Auger Drive (standard flow, confidence high)
23.2 GPM is at or under the 30 GPM maximum (no minimum published). 3481 PSI is within the head's pressure rating.
Good fit
Pengo CS 41-25 Auger Drive (standard flow, confidence high)
23.2 GPM is at or under the 25 GPM maximum (no minimum published). 3481 PSI is within the head's pressure rating.
Good fit
Pengo CS 49-45 Auger Drive (high flow, confidence medium)
40.4 GPM is at or under the 45 GPM maximum (no minimum published).
Marginal
Pengo CS 28-22 Auger Drive (standard flow, confidence high)
23.2 GPM is above the 22 GPM maximum (up to 15%) - needs flow limiting; risk of heat/overspeed. 3481 PSI is within the head's pressure rating.
Marginal
Pengo CS 39-37 Auger Drive (standard flow, confidence high)
Maker publishes only a 37 GPM maximum; 23.2 GPM is under 75% of it - confirm minimum with dealer. 3481 PSI is within the head's pressure rating.
Marginal
Pengo CS 49-36 Auger Drive (standard flow, confidence high)
Maker publishes only a 36 GPM maximum; 23.2 GPM is under 75% of it - confirm minimum with dealer. 3481 PSI is within the head's pressure rating.
Won't run
Danuser EP1020 Auger Drive (standard flow, confidence high)
23.2 GPM is far above the 20 GPM maximum - wrong motor size for this circuit. 3481 PSI is within the head's pressure rating.
Won't run
Danuser EP615 Auger Drive (standard flow, confidence high)
23.2 GPM is far above the 15 GPM maximum - wrong motor size for this circuit. 3481 PSI is within the head's pressure rating.
Won't run
Pengo CS 20-17 Auger Drive (standard flow, confidence high)
23.2 GPM is far above the 17 GPM maximum - wrong motor size for this circuit. 3481 PSI is within the head's pressure rating.
Won't run
Pengo CS 22-20 Auger Drive (standard flow, confidence high)
23.2 GPM is far above the 20 GPM maximum - wrong motor size for this circuit. 3481 PSI is within the head's pressure rating.

Snow Blowers on the Takeuchi TL12V2

7 good fit0 marginal3 won't run

Good fit
Bobcat Snowblower SB36x96 (high flow, confidence medium)
40.4 GPM is inside the 36-45 GPM range.
Good fit
Bobcat Snowblower SB32x86 (standard flow, confidence medium)
23.2 GPM is inside the 13-31 GPM range.
Good fit
Bobcat Snowblower SB36x86 (high flow, confidence medium)
40.4 GPM is inside the 36-45 GPM range.
Good fit
Bobcat Snowblower SB32x80 (standard flow, confidence medium)
23.2 GPM is inside the 13-31 GPM range.
Good fit
Bobcat Snowblower SB32x74 (standard flow, confidence medium)
23.2 GPM is inside the 13-31 GPM range.
Good fit
Bobcat Snowblower SB32x68 (standard flow, confidence medium)
23.2 GPM is inside the 13-31 GPM range.
Good fit
Bobcat Snowblower SB32x60 (standard flow, confidence medium)
23.2 GPM is inside the 13-31 GPM range.
Won't run
Bobcat Snowblower SB26x56 (standard flow, confidence medium)
23.2 GPM is far above the 17 GPM maximum - wrong motor size for this circuit.
Won't run
Bobcat Snowblower SB26x48 (standard flow, confidence medium)
23.2 GPM is far above the 17 GPM maximum - wrong motor size for this circuit.
Won't run
Bobcat Snowblower SB26x36 (standard flow, confidence medium)
23.2 GPM is far above the 17 GPM maximum - wrong motor size for this circuit.

Weekly email: new heads, price changes & recalls

PLACEHOLDER. This form is not connected to any email service and sends nothing.